Olympus VP-10 Manual De Introdução
6
Troubleshooting
68
EN
Problem
Possible cause
Solution
The display is blank.
The battery is not inserted properly.
Check that the positive and negative
terminals of the battery are placed correctly
(
terminals of the battery are placed correctly
(
☞ P.7).
The remaining battery power is low.
Replace or charge the battery
(
(
The power is OFF.
Turn the power ON (
☞ P.8).
Unable to operate
the voice recorder
the voice recorder
The remaining battery power is low.
Replace or charge the battery
(
(
The power is OFF.
Turn the power ON (
☞ P.8).
The voice recorder is in HOLD mode.
Release HOLD mode (
☞ P.30).
Unable to record
There is no remaining memory.
Erase unneeded files (
☞ P.33).
The maximum number of
recordable files has been reached.
recordable files has been reached.
Erase unneeded files (
☞ P.33).
Playback is
inaudible.
inaudible.
The earphones are connected to
the earphone jack.
the earphone jack.
To output the playback through the built-in
speaker, disconnect the earphones.
speaker, disconnect the earphones.
[OFF] has been selected for
[Speaker].
[Speaker].
To output the playback through the built-in
speaker, select [ON] for [Speaker] (
speaker, select [ON] for [Speaker] (
☞ P.45).
The volume is set to [00].
Adjust the volume (
☞ P.23).
The recording is too
quiet.
quiet.
[Low] has been selected for
[Rec Level].
[Rec Level].
Redo recording after setting the
recording level to [High] (
recording level to [High] (
☞ P.38).
The voice recorder is far away from
the recording target.
the recording target.
Move the voice recorder closer to the
recording target.
recording target.
Audio file sound is
distorted.
distorted.
The recording level is adjusted
automatically. Excessively loud
sound input may generate noise.
automatically. Excessively loud
sound input may generate noise.
Record with the voice recorder farther away
from the recording target.
from the recording target.
An audio file is not
recorded in stereo.
recorded in stereo.
[Rec Mode] is set to a mono
recording format (WMA).
recording format (WMA).
Set [Rec Mode] to a stereo recording format
(PCM or MP3) (
(PCM or MP3) (
☞ P.38).
Noise during
playback
playback
Objects brushed against the voice
recorder while recording.
recorder while recording.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The voice recorder was placed near
a mobile phone or fluorescent light
during recording or playback.
a mobile phone or fluorescent light
during recording or playback.
Redo the operation with the voice recorder in
a different location.
a different location.
Troubleshooting