Olympus Stylus 1s Manual De Introdução

EN

You can exchange this for a larger eyecup (EP-11). 

With this camera, you can use one of the separately sold external flash units to achieve 
a flash suited to your needs. The external flashes communicate with the camera, 
allowing you to control the camera’s flash modes with various available flash control 
modes, such as TTL-AUTO.
An external flash unit specified for use with this camera can be mounted on the camera 
by attaching it to the camera’s hot shoe. You can also attach the flash to the flash 
bracket on the camera using the bracket cable (optional). Refer to the documentation 
provided with the external flash units as well.

GN (Guide number) (ISO100)

TTL-AUTO, AUTO, MANUAL

GN14 (28 mm*) 

GN36 (85 mm*) GN20 (24 mm*) 

GN50 (85 mm*) GN28 (24 mm*)

GN20 (28 mm*) 

GN36 (85 mm*) GN20 (24 mm*)

* The focal length of the lens that can be used (Calculated based on 35 mm film camera).

External flash units that are designated for use with this camera and have a remote 
control mode can be used for wireless flash photography. The camera can control the 
flash units in up to three separate groups. See the instruction manuals provided with 
the external flash units for details.

Set the remote flash units to RC mode and place them as desired.

•  Turn each flash unit on, press the MODE button, and select RC mode. 
•  Select a channel and group for each flash unit.

Select [On] for [

# RC Mode] in 

J

 Shooting menu 2 (P. 46).

•  The super control panel switches to RC mode.
•  You can choose a super control panel display by repeatedly pressing the 

INFO 

button.

•  Select a flash mode (note that red-eye reduction is not available in RC mode).