Olympus TG-810 Manual De Instruções

56 EN

t (Settings 3) X Manometer

  The readings may have a margin of error depending 

on meteorological conditions. Use the readings only 
for your reference.

Manometer

Off

Cancels the manometer 
display.

On

Displays the current 
altitude/water depth 
(atmospheric/hydraulic 
pressure) in the shooting 
standby mode screen. 
(–10 m to 5,000 m)

Calibrate

Proceed to the setting 
screen. See below.

m/ft

m

This displays in meters.

ft

This displays in feet.

  When set to [On], a warning message appears in 

the monitor as a water depth close to 7 m (22.9 ft) is 
reached.

1 Use 

FG to select the current altitude/water depth, 

and press the 

A button to set.

1200 m

1200 m

t (Settings 3) X Tap Control

Off

Cancels [Tap Control].

On

[Tap Control] is activated.

Calibrate

Adjusts the tap strength and 
intervals between multiple taps 
on each side of the camera body. 
(top, left, right, & back)

1  Tap the right or left side of the camera body once. 

Then tap the top side of the camera once.

The fl ash mode selection screen is displayed. 

2  Tap the right or left side of the camera body to select a 

function.

3  Tap the back of the camera body twice to confi rm your 

selection.

  Tap the camera fi rmly using the pad of your fi nger.

  When the camera is stabilized on a tripod for 

example, tap control may not work properly.

  To prevent dropping the camera when using tap 

control, strap the camera to your wrist.