Netgear R4500 – N900 Wireless Dual Band Gigabit Router Manual Do Utilizador

Enable Wireless Isolation. If this check box is selected, wireless clients (computers or 
wireless devices) that join the network can use the Internet, but cannot access each other or 
access Ethernet devices on the network.

Enable SSID Broadcast. This feature allows the router to broadcast its SSID so wireless 
stations can see this wireless name (SSID) in their scanned network lists. This check box is 
selected by default. To turn off the SSID broadcast, clear the check box, and click Apply.

Name (SSID). The SSID is also known as the wireless network name. Enter a 32-character 
(maximum) name in this field. This field is case-sensitive. The default SSID is randomly 
generated, and NETGEAR strongly recommends that you do not change this setting.

Channel. This setting is the wireless channel used by the gateway. Enter a value from 1 
through 13. (For products in the North America market, only Channels 1 through 11 can be 
operated.) Do not change the channel unless you experience interference (shown by lost 
connections or slow data transfers). If this happens, experiment with different channels to see 
which is the best. 

Mode. Up to 217 Mbps is the default and allows 802.11n and 802.11g wireless devices to join 
the network. g & b supports up to 54 Mbps. The Up to 450-Mbps setting allows 802.11n 
devices to connect at this speed.

The Security Options section of the Wireless Settings screen lets you change the security 
option and passphrase. NETGEAR recommends that you do not change the security 
option or passphrase, but if you want to change these settings, this section explains how. 
Do not disable security.

Change WPA Security Option and Passphrase

Under Security Options, select the WPA option you want.

In the Passphrase field that displays when you select a WPA security option, enter the 

network key (passphrase) that you want to use. It is a text string from 8 to 63 characters.