Netgear R4500 – N900 Wireless Dual Band Gigabit Router Manual Do Utilizador

Página de 126
NETGEAR genie Advanced Home
37
 N900 Wireless Dual Band Gigabit Router R4500
To set up a default DMZ server: 
1.
On the WAN Setup screen, select the Default DMZ Server check box.
2.
Type the IP address.
3.
Click Apply.
Change the MTU Size
The maximum transmission unit (MTU) is the largest data packet a network device transmits. 
When one network device communicates across the Internet with another, the data packets 
travel through many devices along the way. If any device in the data path has a lower MTU 
setting than the other devices, the data packets have to be split or “fragmented” to 
accommodate the device with the smallest MTU. 
The best MTU setting for NETGEAR equipment is often just the default value, and changing 
the value might fix one problem but cause another. Leave MTU unchanged unless one of 
these situations occurs:
You have problems connecting to your ISP or other Internet service, and the technical 
support of either the ISP or NETGEAR recommends changing the MTU setting. These 
web-based applications might require an MTU change:
-
A secure website that does not open, or displays only part of a web page
-
Yahoo email
-
MSN portal
-
America Online’s DSL service
You use VPN and have severe performance problems.
You used a program to optimize MTU for performance reasons, and now you have 
connectivity or performance problems.
Note:
An incorrect MTU setting can cause Internet communication 
problems such as the inability to access certain websites, frames 
within websites, secure login pages, or FTP or POP servers.
If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are 
willing to experiment, you can gradually reduce the MTU from the maximum value of 1500