Netgear R4500 – N900 Wireless Dual Band Gigabit Router Manual Do Utilizador
Advanced Settings
88
N900 Wireless Dual Band Gigabit Router R4500
2.
Select Advanced > Advanced Setup > Wireless Repeating Function:
Scroll to
view more
settings
view more
settings
3.
For the frequency you want to use, select the Enable Wireless Repeating Function check
box and select the Wireless Base Station radio button.
4.
Enter the MAC address for one or more repeater units.
5.
Click Apply to save your settings.
Set Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
connection to the base station.
Note:
If you are using the base station with a non-NETGEAR router as the
repeater, you might need to change more configuration settings. In
particular, you should disable the DHCP server function on the
wireless repeater AP.
repeater, you might need to change more configuration settings. In
particular, you should disable the DHCP server function on the
wireless repeater AP.
To configure the router as a repeater unit:
1.
Log in to the router that will be the repeater. Select Basic > Wireless Settings and
verify that the wireless settings match the base unit exactly. The wireless security option
has to be set to WEP or None.
2.
Select Advanced > Wireless Repeating Function, and select the Enable Wireless
Repeating Function check box and the Wireless Repeater radio button.
3.
Fill in the Repeater IP Address field. This IP address has to be in the same subnet as the
base station, but different from the LAN IP address of the base station.
4.
Click Apply to save your settings.