Netgear M4100-24G-POE+ (GSM7224P) - ProSAFE Gigabit L2+ Managed Switch Guia Do Administrador
Security Management
254
ProSAFE M4100 Managed Switches
2.
View the rate configured.
(GSM7328S) #show ip dhcp snooping interfaces 1/0/2
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
---------- ------------- ------------- ---------------
1/0/2 No 5 1
Web Interface: Configure the Maximum Rate of DHCP
Messages
Messages
1.
Select Security > Control > DHCP Snooping > Interface Configuration.
A screen similar to the following displays:
2.
Select the interface, fill in the Rate Limit (pps) field, and then click Apply.
The screen shows the new rate limit for the interface.
IP Source Guard
IP Source Guard uses the DHCP snooping bindings database. When IP Source Guard is
enabled, the switch drops incoming packets that do not match a binding in the bindings
database. IP Source Guard can be configured to enforce just the source IP address or both
the source IP address and source MAC address.
enabled, the switch drops incoming packets that do not match a binding in the bindings
database. IP Source Guard can be configured to enforce just the source IP address or both
the source IP address and source MAC address.