Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Manual Do Equipamento

Connect one end of the AC power adapter cable to the rear of the switch, and the other 

end to a grounded 3-pronged AC outlet.

Check the Power LED on the front panel of the switch. The LED should light up in the 

following sequence:

The LED turns yellow as the switch runs a Power-On Self-Test (POST). 

If the switch passes the test, the LED turns green. The switch is working and ready to 
pass data. 

If the POST fails, the Power LED blinks yellow. 

If the Power LED does not light up, check that the power cable is plugged in correctly and 
that the power source is good. For help with troubleshooting, see Chapter 3.3, 

.”

SFP+ / SFP Modules

Use only optical transceiver modules that are UL approved and that 
are certified as Laser class 1 products. 

SFP+ and SFP modules (sold separately) can be inserted directly into the switch’s ports.

AXM761 - SFP+ module with an LC connector that is compatible with the IEEE 802.3ae 
(10GBase-SR)

AXM762 - SFP+ module with an LC connector that is compatible with the IEEE 802.3ae 
(10GBase-LR)

AXM763 - SFP+ module with an LC connector that is compatible with the IEEE 802.3aq 
(10GBase-LRM)

SFP+ module with an LC connector that is compatible with the IEEE 802.3aq 
(10GBase-LRM) and IEEE 802.3ae (10GBase Ethernet) standards.

AGM731F - SFP module with LC connector, compatible with the IEEE 802.3z 
1000Base-SX standard.

AGM732F - SFP module with LC connector, compatible with the IEEE 802.3z 
1000Base-LX standard.