Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Manual Do Equipamento

l

Power 

•

Solid green: The power module is present, is supplying power to the switch, and 
is working normally.

•

Solid yellow: The system is in boot-up stage.

•

Blinking yellow: Power module is present but has failed. 

•

Off: Power is disconnected. 

Fan

•

Solid green: The fan is operating normally.

•

Solid yellow: The fan has failed.

•

Off: No fan is detected. 

10GBT Ports 
(2 LEDs per port) 

100/1000M Link/ACT LED:
•

Off: No 100/1000M link is established on the port.

•

Solid yellow: A valid 100/1000M link is established on the port.

•

Blinking yellow: The port is transmitting or receiving packets 

10/100Mbps.

10G Link/ACT LED:
•

Off: No 10G link is established on the port.

Solid Green – A valid 10Gbps link is established on the port.

•

Blinking Green – Packet transmission or reception is occurring on the port at 
10Gbps.

Note: If port 21–24 media is changed to SFP+, the RJ-45 LEDs change to OFF 
status.

 

SFP+ Ports 
(1 SPD/Link/ACT
One LED per port) 

•

Off: No SFP/SFP+ module link is established on the port. 

•

Solid green: A valid 10Gbps SFP+ module link is established on the port. 

•

Blinking green: The port is transmitting or receiving packets at 10Gbps.

•

Solid yellow: A valid 1Gbps SFP module link is established on the port.

•

Blinking yellow: Packet transmission or reception is occurring on the port at 
1Gbps.

Note: If port 21–24 media is changed to copper, the SFP+ LEDs change to Off 
status. 

 

M7100-24X Rear Panel

The rear panel has two fan trays, a power supply connector, a replaceable power supply, and 
a bay for an optional redundant power supply (APS300W).