Netgear R7500v2 - Nighthawk Dual Band Gigabit Wireless Router - 802.11ac Manual Do Utilizador

Solid. A powered-on device is connected to the Ethernet port.

Blinking. The port is sending or receiving traffic.

Off. No device is connected to this Ethernet port.

Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios
on and off.

WiFi On/Off button with LED

If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are
turned off and you cannot use WiFi to connect to the router.

This button lets you use WPS to join the WiFi network without typing the WiFi
password. The WPS LED blinks white during this process and then lights solid
white.

WPS button with LED

You can use the LED On/Off switch on the rear panel of the router to turn the LEDs on the top of the
router on or off. See 

 on page 12.

The rear panel connections and buttons are shown in the following figure.

Figure 3. Router rear panel

Pressing the Reset button restores the factory settings. See 

 on page 181.