Netgear R7500v2 - Nighthawk Dual Band Gigabit Wireless Router - 802.11ac Manual Do Utilizador
If the destination is a single host, type 255.255.255.255.
11.
Type the gateway IP address, which must be on the same LAN segment as the router.
12.
Type a number from 1 through 15 as the metric value.
This value represents the number of routers between your network and the destination. Usually, a
setting of 2 or 3 works, but if this is a direct connection, set it to 1.
setting of 2 or 3 works, but if this is a direct connection, set it to 1.
13.
Click the Apply button.
The static route is added.
Edit a Static Route
To edit a static route:
1.
Launch a web browser from a computer or wireless device that is connected to the network.
2.
Type http://www.routerlogin.net .
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes pag displays.
5.
In the table, select the radio button for the route.
6.
Click the Edit button.
The Static Routes page adjusts.
7.
Edit the route information.
8.
Click the Apply button.
Your changes are saved.
Delete a Static Route
To delete a static route:
1.
Launch a web browser from a computer or wireless device that is connected to the network.
2.
Type http://www.routerlogin.net .
Manage Your Network
117