Netgear R7500v2 - Nighthawk Dual Band Gigabit Wireless Router - 802.11ac Manual Do Utilizador
The BASIC Home page displays.
4.
Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5.
Click the Erase button.
The factory default settings are restored. The user name is admin, the password is password, and
the LAN IP address is 192.168.1.1. DHCP is enabled.
the LAN IP address is 192.168.1.1. DHCP is enabled.
Remote Management
You can access your router over the Internet to view or change its settings. You must know the router’s
WAN IP address to use this feature. For information about remote access using Dynamic DNS, see
WAN IP address to use this feature. For information about remote access using Dynamic DNS, see
on page 80.
Be sure to change the password for the user name admin to a secure password.
The ideal password contains no dictionary words from any language and contains
The ideal password contains no dictionary words from any language and contains
Note
uppercase and lowercase letters, numbers, and symbols. It can be up to 30
characters. See
characters. See
on page 106.
To set up remote management:
1.
Launch a web browser from a computer or wireless device that is connected to the network.
2.
Type http://www.routerlogin.net .
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Remote Management.
Manage Your Network
121