Netgear JWNR2000v2 - Wireless-N 300 Router Manual Do Utilizador

information by contacting the publisher of the application, by asking user groups or 
newsgroups, or by searching.

Enter the starting port and ending port numbers. If the application uses a single port 
number, enter that number in both fields.

If you know that the application uses either TCP or UDP, select the appropriate 
protocol. If you are not sure, select 

Both.

Select the radio button for the IP address configuration you want to block, and then enter the 

IP addresses in the appropriate fields.

Click 

Add to enable your Block Services Setup selections.

Block Services by IP Address Range

In the Filter Services For area, you can block the specified service for a single computer, a 
range of computers (having consecutive IP addresses), or all computers on your network.

Set the Time Zone

The router uses the Network Time Protocol (NTP) to obtain the current time and date from 
one of several network time servers on the Internet. You can check and set (if needed) the 
time zone to ensure time stamps match your local time.

Select 

Security > Schedule to display the following screen: