Netgear JWNR2000v2 - Wireless-N 300 Router Manual Do Utilizador

Automatic Firmware Checking On

When automatic firmware checking is on, the router performs the check and notifies you if an 
upgrade is available or not as shown here.

Click 

Yes to allow the router to download and install the new firmware. The upgrade 

process could take a few minutes. When the upload is complete, your router restarts.

Go to the JWNR2000v2 support page at 

 and read the new 

firmware release notes to determine whether you need to reconfigure the modem router 

after upgrading.

If you get a “Firmware needs to be reloaded” message, it means a 

problem has been detected with the router’s firmware. Follow the 
prompts to correct the problem or see the next section for a 
description of the steps.

Manually Check for Firmware Upgrades

You can use the Router Upgrade screen to manually check the NETGEAR website for newer 
versions of firmware for your product.

When uploading firmware to the router, do not interrupt the Web 

Select 

Maintenance > Router Status and make a note of the router firmware version 

number

.

Go to the JWNR2000v2 support page on the NETGEAR website at