Netgear R6900 - Nighthawk AC1900 Smart WiFi Router Manual Do Utilizador

Página de 248
To change the default SIP ALG setting:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5.
To disable the SIP ALG, select the Disable SIP ALG check box.
The SIP ALG is enabled by default.
6.
Click the Apply button.
Your settings are saved.
Manage the LAN IP Address Settings
The router is preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The router’s
default LAN IP configuration is as follows:
LAN IP address. 192.168.1.1 (this is the same as www.routerlogin.net)
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks and are suitable for
most applications. The IP address and subnet mask identify which addresses are local to a specific device and
which must be reached through a gateway or router. You might want to change these settings if you need a specific
IP subnet that one or more devices on the network use, or if competing subnets use the same IP scheme.
To change the LAN IP address settings:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
Manage the WAN and LAN Network Settings
145
Nighthawk AC1900 Smart WiFi Router Model R6900