Netgear R6900 - Nighthawk AC1900 Smart WiFi Router Manual Do Utilizador

Select the PIN Number radio button.

In the Enter Clients’ PIN field, enter the PIN number of the WiFi device.

Click the Next button.

For four minutes, the router attempts to find the WiFi device (that is, the client) that you want to join the router’s
main WiFi network.

During this time, the WiFi LED on the top panel of the router blinks white.

Within four minutes, go to the WiFi device and use its WPS software to join the network without entering a
password.

When the router establishes a WPS connection, the WiFi LED lights solid white and the Add WPS Client page
displays a confirmation message.

To verify that the WiFi device is connected to the router’s main WiFi network, select BASIC > Attached Devices.

The WiFi device displays onscreen.

The router comes with preset security. This means that the WiFi network name (SSID), network key (password),
and security option (encryption protocol) are preset in the factory. You can find the preset SSID and password on
the router label.

The preset SSID and password are uniquely generated for every device to protect and
maximize your WiFi security.

We recommend that you do not change your preset security settings. If you change your preset security settings,
make a note of the new settings and store it in a safe place where you can easily find it.

If you use a WiFi computer to change the SSID or other WiFi security settings, you are disconnected when you click
the Apply button. To avoid this problem, use a computer with a wired connection to access the router.