Netgear R6900 - Nighthawk AC1900 Smart WiFi Router Manual Do Utilizador

Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically
assigns this address.

Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the
IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also.

Select a Router MAC Address radio button:

Use Default Address. Use the default MAC address.

Use Computer MAC Address. The router captures and uses the MAC address of the computer that you
are now using. You must use the one computer that the ISP allows.

Use This MAC Address. Enter the MAC address that you want to use.

Click the Apply button.

Your settings are saved.

Click the Test button to test your Internet connection.

If the NETGEAR website does not display within one minute, see 

The router supports many different types of IPv6 Internet connections for which you can specify the settings manually.

The router can support an IPv6 Internet connection through the following connection types:

Auto Detect. For more information, see 

Auto Config. For more information, see 

 on page 36.

6to4 tunnel. For more information, see 

 on page 37.

Pass-through. For more information, see 

Fixed. For more information, see 

DHCP. For more information, see 

 on page 41.

6rd. For more information, see 

PPPoE. For more information, see 

 on page 45.

Which connection type you must use depends on your IPv6 ISP. Follow the directions that your IPv6 ISP gave you.