Netgear R8000 - Nighthawk X6—AC3200 Tri-Band WiFi Gigabit Router Manual Do Utilizador
Hardware Setup
10
Nighthawk
X6
AC3200
Tri-Band
WiFi Router
Top View
The status LEDs and buttons are located on the top of the router.
WPS button
WiFi On/Off button
LEDs
Figure 2. Router LEDs and buttons
Table 1. LED and button descriptions
LED
Description
Power
•
Solid amber. The router is starting.
•
Blinking amber. The firmware is upgrading, or the Reset button was pressed.
•
Solid white. The router is ready.
•
Blinking white. The firmware is corrupted.
•
Off. Power is not supplied to the router.
Internet
•
Solid white. The Internet connection is ready.
•
Solid amber. The router detected an Ethernet cable connection to the modem.
•
Off. No Ethernet cable is connected between the router and the modem.
2.4 GHz
Wireless
Wireless
•
Solid white. The 2.4 GHz WiFi radio is operating.
•
Blinking. The router is sending or receiving WiFi traffic.
•
Off. The 2.4 GHz WiFi radio is off.
5 GHz WiFi 1
•
Solid white. The 5 GHz-1 WiFi radio is operating.
•
Blinking. The router is sending or receiving WiFi traffic.
•
Off. The 5 GHz-1 WiFi radio is off.
5 GHz WiFi 2
•
Solid white. The 5 GHz-2 WiFi radio is operating.
•
Blinking. The router is sending or receiving WiFi traffic.
•
Off. The 5 GHz-2 WiFi radio is off.