Netgear R8000 - Nighthawk X6—AC3200 Tri-Band WiFi Gigabit Router Manual Do Utilizador
Specify Your Internet Settings
40
Nighthawk
X6
AC3200
Tri-Band
WiFi Router
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Setup > WAN Setup.
5.
In the MTU Size field, enter a value from 64 to 1500.
6.
Click the Apply button.
Your settings are saved.
If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are
willing to experiment, you can gradually reduce the MTU from the maximum value of 1500
until the problem goes away. The following table describes common MTU sizes and
applications.
willing to experiment, you can gradually reduce the MTU from the maximum value of 1500
until the problem goes away. The following table describes common MTU sizes and
applications.
Table 2. Common MTU sizes
MTU
Application
1500
The largest Ethernet packet size. This setting is typical for connections that do not use
PPPoE or VPN and is the default value for NETGEAR routers, adapters, and switches.
PPPoE or VPN and is the default value for NETGEAR routers, adapters, and switches.
1492
Used in PPPoE environments.
1472
Maximum size to use for pinging. (Larger packets are fragmented.)
1468
Used in some DHCP environments.
1460
Usable by AOL if you do not have large email attachments, for example.
1436
Used in PPTP environments or with VPN.
1400
Maximum size for AOL DSL.
576
Typical value to connect to dial-up ISPs.
Enable the Bridge or Add a VLAN Tag Group
Some devices, such as an IPTV, cannot work behind a router’s network address translation
(NAT) or firewall. Based on what your Internet Service Provider (ISP) requires, in order for the
(NAT) or firewall. Based on what your Internet Service Provider (ISP) requires, in order for the