Netgear R7800 - Nighthawk X4S AC2600 Smart WiFi Router Guia Da Instalação

Quick Start

Model R7800

 Unplug your modem, remove and replace the backup battery if it 

uses one, and then plug the modem back in.
Use the Ethernet cable to connect the modem to the yellow Internet port on the 
router.
Connect the router to a power source. The router’s Power LED 

 lights amber 

and then turns white when the router is ready. 

Make sure that the router’s WiFi LED 

 is lit. Find the router’s preassigned WiFi 

network name and password on the label on the router. 
Open the WiFi connection manager on your computer or other WiFi-enabled 
device, find the router’s WiFi network name, and use the router’s password to 
connect.
Launch a web browser. If the NETGEAR installation assistant does not display, visit 

. If a login window opens, enter 

admin for the user name and 

password for the password.
Follow the NETGEAR installation assistant.

Remove the antenna caps.
To determine where to attach the antennas, match the labels on the antennas with the 
labels on the router.
Attach and tighten the antennas on the threaded antenna posts as shown.