Netgear WC7520 - ProSafe 20-AP Wireless Controller Manual De Referência

Página de 213
Monitoring the Wireless Network and Components
181
 ProSafe 20-AP Wireless Controller WC7520
WPA
The number of wireless clients that are connected to managed access points using 
security profiles configured with WPA.
WPA2
The number of wireless clients that are connected to managed access points using 
security profiles configured with WPA2.
Rogue Access Points section
Rogue AP current
The total number of unique rogue and unmanaged neighboring access points that 
are detected now by the wireless controller.
Rogue AP count 24hrs
The total number of unique rogue and unmanaged neighboring access points that 
were detected over the last 24 hours by the wireless controller.
Network Info section
This information is self-explanatory.
Redundancy Status section
This information displays only if wireless controller redundancy is configured.
Controller Mode
The redundancy mode in which the wireless controller functions (Primary or 
Secondary).
Redundancy State
The state of the redundancy group (Active, Down, Sync in progress, Firmware 
mismatch).
Secondary Status
The status of the secondary controller in the redundancy group (Reachable or Not 
reachable).
Sync Status
The synchronization status between the wireless controllers in the redundancy 
group (In Sync or Not in Sync).
Primary IP Address
The IP address of the primary controller in the redundancy group.
Secondary IP Address
The IP address of the secondary controller in the redundancy group.
Virtual IP
The common IP address that is used by both the primary and secondary controller 
in the redundancy group and that always is owned by the active controller.
Table 46.  Controller summary information (continued)
Item
Description