Netgear WC7520 - ProSafe 20-AP Wireless Controller Manual De Referência

Configure the settings as explained in the following table:

Click Apply to save your settings.

Configure IP and VLAN Settings

The IP Settings screen lets you configure the management IP address settings of the 
wireless controller. 



Select Configuration > System > IP/VLAN. The IP Settings screen displays:

Time Zone

From the drop-down list, select the local time zone for your country or region.

Current Time

This is a nonconfigurable field that displays the current time at your location.

NTP Client

Select the Enable radio button to use a Network Time Protocol (NTP) server to 
synchronize the clock of the wireless controller and managed access points. 
Select the Disable radio button if you do not want to use an NTP server.

Use Custom NTP Server

Select this check box if you want to use an alternate NTP server. By default, the 
NETGEAR NTP server is used.

Hostname/IP Address

Enter the host name or IP address of the NTP server, if you are using a custom 
NTP server.