Netgear ANT2409v2 – Indoor/Outdoor 9 dBi Omni-directional Antenna Guia Da Instalação

1-2

•

Lightning Arrestor 

•

Reverse N/SMA Adapter

•

Antenna mounting assembly (tube, grommet, 2 brackets, screws, washers) 

•

L shape bracket for top & ceiling mounting

•

Screws, bolts, washers, U-bolts and plastic anchors

•

This Installation Guide, and a Warranty and Support Information card

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR 
dealer. Keep the carton, including the original packing materials, in case you need 
to return the product for repair.

To obtain optimal results in extending wireless range with antenna installations, 
consult a qualified professional installer for site survey and installation assistance.

Antenna cable for connecting the wireless device is sold separately. Please use a 
NETGEAR model ACC-10314-01, 02, 03, 04, or 05 cable.

In the U.S., the ANT2409 antenna should only be used with devices that have 
been FCC approved for use with it. Please check the NETGEAR website at 
http://www.NETGEAR.com/go/antennas_fcc for an updated list of FCC approved 
devices.

For Europe, use of any antenna requires careful planning and extra consideration 
to comply with EU emissions and health standards and regulations. Antenna 
installation must comply with the maximum level authorized by each country. 
Please check the NETGEAR website at
http://www.NETGEAR.com/go/antennas_eu for a list of restrictions and approved 
devices.

Note: A ground cable is not included but required for outdoor 

installation. The grounding cable must be equivalent or better 
than: AWG 10, UL 1015, Stranded, 600 V, 105 

o

C, green or 

green/yellow insulation, 2 clip of 5.5 mm inner diameter 
cramped at both ends, cable no longer than 5 meters