Netgear WC7600v1 - ProSAFE Wireless Controller Manual Do Utilizador
Configure WiFi and QoS Settings
194
ProSAFE Wireless Controller
5.
Click the tab for the profile group for which you want to configure the WiFi settings.
6.
Click the tab for the radio for which you want to configure the WiFi settings.
7.
Configure the settings in the table at the bottom of the page as described in the following
table.
table.
Setting
Description
AP Name
The name of the access point.
Access Point Channel
Override these settings only if a specific need exists. From the menu, select a
channel and frequency for the access point to operate in.
channel and frequency for the access point to operate in.
Note:
Changing a channel might temporarily affect the traffic on the access point.
Note:
By default, the access point’s channel and frequency are set to the ones
that are enabled for the radio and profile group. If the channel and frequency are
not available on the access point, the channel and frequency are set to the ones
providing the highest performance. For more information, see
not available on the access point, the channel and frequency are set to the ones
providing the highest performance. For more information, see