Netgear FWG114Pv1 – Wireless Firewall with USB Print Server Manual De Referência
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
8-32
Virtual Private Networking
March 2004, 202-10027-01
Netgear VPN Client to FWG114P
Follow these procedures to configure a VPN tunnel from a NETGEAR ProSafe VPN Client to an
FWG114P. This case study follows the Virtual Private Network Consortium (VPNC)
interoperability profile guidelines. The menu options for the FVS328, FVL328, FWAG114, and
FWG114P are the same.
FWG114P. This case study follows the Virtual Private Network Consortium (VPNC)
interoperability profile guidelines. The menu options for the FVS328, FVL328, FWAG114, and
FWG114P are the same.
Configuration Profile
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
Table 8-1.
Summary
VPN Consortium Scenario:
Scenario 1
Type of VPN
PC/Client-to-Gateway
Security Scheme:
IKE with Preshared Secret/Key (not Certificate-based)
Date Tested:
December 2003
Model/Firmware Tested:
Gateway
FWG114P firmware v 2.2
Client
NETGEAR ProSafe VPN Client v10.1
IP Addressing:
Gateway Static
IP
address
Client Dynamic