Netgear FWG114Pv1 – Wireless Firewall with USB Print Server Manual De Referência

2-2

Introduction

You can install, configure, and operate the FWG114P to take full advantage of a variety of routing 
options on both the serial and broadband WAN ports, including:

•

Internet access via either the serial or broadband port.

•

Auto fail-over connectivity through an analog or ISDN modem connected to the serial port.

 

If the broadband Internet connection fails, after waiting for an amount of time you specify, the 
FWG114P can automatically establish a backup ISDN or dial-up Internet connection via the 
serial port on the firewall.

•

Remote Access Server (RAS) that allows you to log in remotely through the serial port to 
access a server on your LAN, other LAN resources, or the Internet, based on a user name and 
password you define.

•

LAN-to-LAN access between two FWG114P wireless firewall/print servers through the serial 
port, with the option of enabling auto-failover Internet access across the serial LAN-to-LAN 
connection.

The FWG114P Wireless Firewall/Print Server includes an 802.11g-compliant wireless access 
point. The access point provides:

•

802.11b standards-based wireless networking at up to 11 Mbps.

•

802.11g wireless networking at up to 54 Mbps, which conforms to the 802.11g standard.

•

WPA enterprise class strong security with RADIUS and certificate authentication as well as 
dynamic encryption key generation.

•

WPA-PSK pre-shared key authentication without the overhead of RADIUS servers but with 
all of the strong security of WPA.

•

64-bit and 128-bit WEP encryption security.

•

WEP keys can be generated manually or by passphrase.

•

Wireless access can be restricted by MAC Address.

•

Wireless network name broadcast can be turned off so that only devices that have the network 
name (SSID) can connect.