Netgear FWG114Pv1 – Wireless Firewall with USB Print Server Manual De Referência
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Connecting the FWG114P to the Internet
3-13
March 2004, 202-10027-01
If your ISP allows access from only one specific computer’s Ethernet MAC address, select
“Use this MAC address.” The firewall will then capture and use the MAC address of the
computer that you are now using. You must be using the one computer that is allowed by the
ISP. Otherwise, you can type in a MAC address.
“Use this MAC address.” The firewall will then capture and use the MAC address of the
computer that you are now using. You must be using the one computer that is allowed by the
ISP. Otherwise, you can type in a MAC address.
Note: Some ISPs will register the Ethernet MAC address of the network interface card in your
computer when your account is first opened. They will then only accept traffic from the MAC
address of that computer. This feature allows your firewall to masquerade as that computer by
using its MAC address.
computer when your account is first opened. They will then only accept traffic from the MAC
address of that computer. This feature allows your firewall to masquerade as that computer by
using its MAC address.
4.
Click Apply to save your settings.
5.
Click Test to test your Internet connection. If the NETGEAR Web site does not appear within
one minute, refer to
one minute, refer to
”.
Wizard-Detected Fixed IP Account Setup
If the Setup Wizard determines that your Internet service account uses Fixed IP assignment, you
will be directed to the menu shown in
will be directed to the menu shown in
Figure 3-10
below:
Figure 3-10: Setup Wizard menu for Fixed IP address