Netgear FWG114Pv1 – Wireless Firewall with USB Print Server Manual De Referência

Print Server

7-1

This chapter describes how to install and configure the print server in your ProSafe Wireless 
802.11g  Firewall/Print Server Model FWG114P.

The FWG114P supports these methods for printing:

•

For Windows XP and 2000 Only: TCP/IP Line Printer Remote (LPR) Printing 

— No software needs to be installed

— Windows XP or 2000 users can print directly to the firewall. Print jobs are spooled 

(queued) on each computer. The computer sends the print job directly to the LAN IP 
address of the FWG114P.

•

For Windows 95/98/Me, NT4.0, 2000, and XP: Netgear Printer Port Driver 

— Install the Netgear Printer Port Driver on Each computer.

— After installing the Print Port Driver from the Resource CD for the ProSafe Wireless 

802.11g  Firewall/Print Server Model FWG114P (SW-10023-02) Windows users can print 
directly to the firewall. Print jobs are spooled (queued) on each computer. 

— No software needs to be installed

— LPR printing can be set up on any Macintosh that has Desktop Printing installed or 

available. Desktop Printing is supported on MacOS versions beginning from 8.1.  
LaserWriter8 version 8.5.1 or higher is also required.

•

For Windows NT 4.0 Server or 2000 Server: LPD/LPR Printing 

— No software needs to be installed

— If using Windows NT 4.0 Server or Windows 2000 Server, LPD/LPR printing can be used. 

No software needs to be installed on either the Windows Server or each client computer. 
Print jobs will be spooled (queued) on the Windows Server, and can be managed using the 
standard Windows Server tools.