Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netgear
  4. UTM25S – ProSECURE Unified Threat Management (UTM) Appliance with DSL and Wireless modules
  5. Guia Da Instalação

Netgear UTM25S – ProSECURE Unified Threat Management (UTM) Appliance with DSL and Wireless modules Guia Da Instalação

Download
Página de 2
1
2
5
4
6
3
7. Kensington lock
9. Module selection for console 11. Power connector
8. Factory reset button
10. Console port
12. Power switch
7
10
9
8
11
12
Installation Guide
Connect the Unit
For initial setup, connect the WAN Ethernet port to an active WAN connection such 
as a broadband modern, connect a DHCP enabled computer to a LAN port, and 
turn on the unit. Verify the following:
•     
Power LED: It takes about a minute to boot. The power LED should turn solid 
green. If it does not, see the Troubleshooting section of the Reference Manual. 
•     
Test LED: When you first turn on the unit, the amber test LED is lit for 
approximately 2 minutes. 
•     
WAN Status LED: The status LED on the connected WAN port should be lit. If 
not, make sure that the Ethernet cable is securely attached to the modem and 
the WAN port, and that the modem is powered on. 
•     
LAN Status LED: A LAN status LED should be lit. If not, ensure that the Ethernet 
cable from the computer to the unit is securely attached at both ends, and that 
the computer is turned on.
Log in to the Unit
1.   
Use a browser to connect to 
https://192.168.1.1
 
https://192.168.1.1.
2.   
When prompted, enter admin for the 
User Name and password for the 
Password. Click Login.  
 
You are now connected. After 5 minutes of 
inactivity (the default login time-out), you 
are automatically logged out.
Note:
 
When the unit scans secure HTTPS 
traffic, import its root CA certificate into client 
browsers. Click the link on the login screen to 
download it.
Use the Setup Wizard for Basic Configuration
The Setup Wizard guides you through the basic network and scanning setup. 
Note:
 
If you choose to bypass the Setup Wizard, be sure to configure an alerts 
email address and change the admin password.
1.   
Start the Setup Wizard.
Select Wizards > SetupWizard 
to start the wizard.
For guidance on how to fill in 
the wizard screens, refer to the 
online help or the reference 
manual via a link in the 
Support > Documentation 
page.
ProSecure Unified Threat Management Appliance UTM25S
Note: Electronic License
This product includes an electronic license
that activates automatically upon product registration.
Follow these instructions to configure your ProSecure® Unified Threat 
Management appliance UTM25S appliance to use a single WAN interface, and 
enable the default threat management scanning. Then, consult the reference 
manual for instructions for configuring other options such as multiple WAN settings, 
VPN, firewall, and custom scanning. You can access the reference manual from the 
product management interface, via the resource CD and from the NETGEAR 
support site: 
http://downloadcenter.netgear.com
. 
Estimated time: 30 minutes.
Verify the Package Contents
•     
ProSecure UTM25S appliance 
•     
Installation guide
•     
Resource CD
•     
Rubber feet (4) with adhesive backing
•     
Rack mount brackets (some models)
•     
Power cord
Familiarize Yourself with the Unit and Complete Setup
Familiarize yourself with the ports and LEDs on the front of the unit.and with the 
connectors and controls on the back of the unit.
1. Power and Test LEDs
2. USB port (future use)
3. Gigabit LAN ports
4. LAN port 4 DMZ 
5. Gigabit WAN ports,
6. Accessory modules
UTM25S_IG_13Sept2012.fm  Page 1  Thursday, September 13, 2012  3:28 PM