Netgear UTM150 – ProSECURE Unified Threat Management (UTM) Appliance Guia Da Instalação

NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or 
other countries. Other brand and product names are trademarks or registered trademarks of their respective 
holders. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. 
Intended for indoor use only in all EU member states, EFTA states, and Switzerland.

Web security (antivirus settings) and scan exceptions based on size

Web categories to be blocked

Email notification

Scan engine and signatures update settings

Click the Apply button to save your changes.

The UTM reboots. If the IP address of your computer is now on a different 
subnet, restart the computer to refresh its network settings so you can log in to 
the UTM again.

For detailed steps about how to configure the UTM by using the Setup Wizard, 

see Chapter 2, “Use the Setup Wizard to Provision the UTM in Your Network,” of the 
reference manual.

To receive threat management component updates and use telephone support, you 
need to register your UTM with NETGEAR. You might have purchased the UTM 
with a 1- or 3-year license. The UTM also comes with four 30-day trial licenses:

Web protection

Email protection

Support and maintenance

Application control and IPS

If your UTM is unregistered, you can use the 30-day trial period for all four types of 
licenses to perform the initial testing and configuration.

Activating the licenses initiates their terms of use. Activate the licenses only when 
you are ready to start using the UTM. The 30-day trial licenses are revoked once 
you activate the purchased licenses.

Make sure that the UTM has Internet access.

Open the web management interface.

Select Support > Registration. The Registration screen displays.

Enter one of the license keys in the Registration Key field.

Complete the fields in the Customer Information and VAR Information sections 
of the screen.

Click one of the following buttons:

Trial. Activates a trial license and registers the UTM with the NETGEAR 
registration and update server.

Register. Activates a purchased license and registers the UTM with the 
NETGEAR registration and update server.

If necessary, repeat Step 4 and Step 6 for additional license keys.

After the registration and activation are complete, the Registration screen 
shows the license keys and their expiration dates:

If you have purchased the UTM with a 1- or 3-year license, you might be able to use 
the electronic licensing option. When the UTM is connected to the Internet, you 
need to enter only your customer information and optional value-added reseller 
(VAR) information on the Register screen but do not need to enter the license 
numbers. When you click the Register button, the UTM automatically downloads 
and activates the license keys because the serial number of the UTM is linked to the 
license.

If you have purchased a license from a VAR (either directly or over the web) after 
purchase of the UTM, the VAR should email you the license keys or provide them to 
you in another way. To register and activate the license keys, follow the regular 
registration procedure as explained in the previous section (see steps 1–7).

For extensive information about configuring and using your UTM, see the reference 
manual, which you can access from 

 or from the 

web management interface.

Open the web management interface.

Select one of the following:

To view the reference manual, select Support > Documentation.

To view the product support page, select Support > Knowledge Base.

Visit 

 for product updates and web support.

For the complete EU Declaration of Conformity, visit 

.

NETGEAR recommends that you use only the official NETGEAR support 
resources.