Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
IPv6 Multicast Commands
1157
M5300, M6100, and M7100 Series ProSAFE Managed Switches
IPv6 PIM Commands
This section describes the commands you use to configure Protocol Independent Multicast
-Dense Mode (PIM-DM) and Protocol Independent Multicast - Sparse Mode (PIM-SM) for
IPv6 multicast routing. PIM-DM and PIM-SM are multicast routing protocols that provides
scalable inter-domain multicast routing across the Internet, independent of the mechanisms
provided by any particular unicast routing protocol. Only one PIM mode can be operational at
a time.
-Dense Mode (PIM-DM) and Protocol Independent Multicast - Sparse Mode (PIM-SM) for
IPv6 multicast routing. PIM-DM and PIM-SM are multicast routing protocols that provides
scalable inter-domain multicast routing across the Internet, independent of the mechanisms
provided by any particular unicast routing protocol. Only one PIM mode can be operational at
a time.
ipv6 pim dense
This command enables the administrative mode of PIM-DM in the router.
Command example:
(NETGEAR) (Config) #ipv6 pim dense
no ipv6 pim dense
This command disables the administrative mode of PIM-DM in the router.
ipv6 pim sparse
This command enables the administrative mode of PIM-SM in the router.
Command example:
(NETGEAR) (Config) #ipv6 pim sparse
Default
disabled
Format
ipv6 pim dense
Mode
Global Config
Format
no ipv6 pim dense
Mode
Global Config
Default
disabled
Format
ipv6 pim sparse
Mode
Global Config