Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
Management Commands
167
M5300, M6100, and M7100 Series ProSAFE Managed Switches
script validate
This command validates a script file by parsing each line in the script file, in which
scriptname
scriptname
is the name of the script to validate.The validate option is intended to be used
as a tool for script development. Validation identifies potential problems. It might not identify
all problems with a given script on any given device.
all problems with a given script on any given device.
Prelogin Banner, System Prompt, and Host Name
Commands
Commands
This section describes the commands you use to configure the prelogin banner and the
system prompt. The prelogin banner is the text that displays before you login at the
system prompt. The prelogin banner is the text that displays before you login at the
User:
prompt.
copy (pre-login banner)
The copy command includes the option to upload or download the CLI Banner to or from the
switch. You can specify local URLs by using FTP, TFTP, SFTP, SCP, or Xmodem.
switch. You can specify local URLs by using FTP, TFTP, SFTP, SCP, or Xmodem.
Note:
The ip6address argument is also a valid parameter for routing
packages that support IPv6.
packages that support IPv6.
set prompt
This command changes the name of the prompt. The length of name may be up to 64
alphanumeric characters.
alphanumeric characters.
Term
Definition
Output Format
line number: line contents
Format
script validate
scriptname
Mode
Privileged EXEC
Default
none
Format
copy <tftp://<ipaddr>/<filepath>/<filename>> nvram:clibanner
copy nvram:clibanner <tftp://<ipaddr>/<filepath>/<filename>>
Mode
Privileged EXEC
Format
set prompt prompt-string
Mode
Privileged EXEC