Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
Utility Commands
322
M5300, M6100, and M7100 Series ProSAFE Managed Switches
Green Ethernet Commands
This section describes the commands you use to configure Green Ethernet modes on the
system. The purpose of the Green Ethernet features is to save power. NETGEAR Managed
Switch software supports the following three Green Ethernet modes:
system. The purpose of the Green Ethernet features is to save power. NETGEAR Managed
Switch software supports the following three Green Ethernet modes:
•
Energy-detect mode
•
Energy-efficient Ethernet (EEE) mode
Note:
Green Ethernet commands are supported on M6100 and M7100
series switches only.
series switches only.
green-mode energy-detect
Use this command to enable energy-detect mode on an interface or on a range of interfaces.
With this mode enabled, when the port link is down, the port automatically powers down for
short period of time and then wakes up to check link pulses. In energy-detect mode, the port
can perform auto-negotiation and consume less power when no link partner is present.
With this mode enabled, when the port link is down, the port automatically powers down for
short period of time and then wakes up to check link pulses. In energy-detect mode, the port
can perform auto-negotiation and consume less power when no link partner is present.
Note:
.This command is supported on M6100 series switches only.
no green-mode energy-detect
Use this command to disable energy-detect mode on the interface(s).
green-mode eee
Use this command to enable EEE low-power idle mode on an interface or on a range of
interfaces. The EEE mode enables both send and receive sides of the link to disable some
functionality for power saving when lightly loaded. The transition to EEE low-power mode
interfaces. The EEE mode enables both send and receive sides of the link to disable some
functionality for power saving when lightly loaded. The transition to EEE low-power mode
Default
disabled
Format
green-mode energy-detect
Mode
Interface Config
Format
no green-mode energy-detect
Mode
Interface Config