Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
Routing Commands
768
M5300, M6100, and M7100 Series ProSAFE Managed Switches
no ip ospf mtu-ignore
This command enables the OSPF MTU mismatch detection.
IP Event Dampening Commands
dampening
Use this command to enable IP event dampening on a routing interface.
no dampening
This command disables IP event dampening on a routing interface.
Format
no ip ospf mtu-ignore
Mode
Interface Config
Format
dampening [half-life period] [reuse-threshold suppress-threshold
max-suppress-time [restart restart-penalty]]
Mode
Interface Config
Parameter
Description
Half-life period
The number of seconds it takes for the penalty to reduce by half. The configurable range is 1-30
seconds. Default value is 5 seconds.
seconds. Default value is 5 seconds.
Reuse Threshold
The value of the penalty at which the dampened interface is restored. The configurable range is
1-20,000. Default value is 1000.
1-20,000. Default value is 1000.
Suppress
Threshold
Threshold
The value of the penalty at which the interface is dampened. The configurable range is 1-20,000.
Default value is 2000.
Default value is 2000.
Max Suppress
Time
Time
The maximum amount of time (in seconds) an interface can be in suppressed state after it stops
flapping. The configurable range is 1-255 seconds. The default value is four times of half-life period.
If half-period value is allowed to default, the maximum suppress time defaults to 20 seconds.
flapping. The configurable range is 1-255 seconds. The default value is four times of half-life period.
If half-period value is allowed to default, the maximum suppress time defaults to 20 seconds.
Restart Penalty
Penalty applied to the interface after the device reloads. The configurable range is 1-20,000. Default
value is 2000.
value is 2000.
Format
no dampening
Mode
Interface Config