Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa

Click the Login button. 

The web management interface menu displays.

Select System > SNMP > SNMP V3 > User Configuration. 

In the User Name list, select the user account to be configured.

The SNMP v3 Access mode field indicates the SNMPv3 access privileges for the user 
account. The admin account has read/write access, and all other accounts are assigned 
read-only access.

Select an Authentication Protocol radio button.

The valid Authentication Protocols are None, MD5 or SHA:

If you select None, the user cannot access the SNMP data from an SNMP browser. 

If you select MD5 or SHA, the user login password are used as the SNMPv3 
authentication password, and you must therefore specify a password, and it must be 
eight characters long.

This specifies the SNMPv3 Authentication Protocol setting for the selected user account.

Select a Encryption Protocol radio button.

The valid Encryption Protocols are None or DES:

If you select the DES Protocol you must enter a key in the Encryption Key field. 

If None is specified for the Protocol, the Encryption Key is ignored.

This specifies the SNMPv3 Encryption Protocol setting for the selected user account. 

If you selected DES in the Encryption Protocol field, enter the encryption key in the 
SNMPv3 Encryption Key

 field.

If you did not select DES, this field is ignored. Valid keys are 0 to 15 characters long. You 
must select the Apply check box to change the Encryption Protocol and Encryption Key.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.