Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
Configure Switching Information
262
M6100, M5300, and M7100 Series Managed Switches
13.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The screen displays the VLAN IDs enabled for IGMP snooping querier.
Configure IGMP Snooping Querier for VLANs
You can configure IGMP queriers for use with VLANs on the network.
To configure querier VLAN settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> Multicast > IGMP Snooping > Querier VLAN Configuration.
8.
To create a new VLAN ID for IGMP snooping, select New Entry from the VLAN ID field and
complete the following fields.
You can also set pre-configurable snooping querier parameters.
•
VLAN ID
. The VLAN ID for which the IGMP snooping querier is to be enabled.
•
Querier Election Participate Mode
. Enable or disable querier Participate mode.
-
Disabled
. Upon seeing another querier of the same version in the VLAN, the
snooping querier moves to the non-querier state.