Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
Multicast Routing
453
M6100, M5300, and M7100 Series Managed Switches
Multicast Overview
Only the following switches support multicast:
•
M6100
•
M5300-28G3
•
M5300-52G3
•
M5300-28GF3
The following switches support multicast with an L3 license:
•
M5300-28G
•
M5300-52G
•
M5300-28G-POE+
•
M5300-52G-POE+
The NETGEAR ProSafe Managed Multicast component is best suited for video and audio
traffic requiring multicast packet control for optimal operation. The Multicast component
includes support for IGMPv2 and IGMPv3. Communication from point to multipoint is called
multicasting. The source host (point) transmits a message to a group of zero or more hosts
(multipoint) that are identified by a single IP destination address. Although the task can be
accomplished by sending unicast (point-to-point) messages to each of the destination hosts,
multicasting is the more desirable method for this type of transmission. A multicast message
is delivered to all members of its destination host group with the same best-efforts reliability
as regular unicast IP messages. The message is not guaranteed to arrive intact at all
members of the destination group or in the same order relative to other messages.
traffic requiring multicast packet control for optimal operation. The Multicast component
includes support for IGMPv2 and IGMPv3. Communication from point to multipoint is called
multicasting. The source host (point) transmits a message to a group of zero or more hosts
(multipoint) that are identified by a single IP destination address. Although the task can be
accomplished by sending unicast (point-to-point) messages to each of the destination hosts,
multicasting is the more desirable method for this type of transmission. A multicast message
is delivered to all members of its destination host group with the same best-efforts reliability
as regular unicast IP messages. The message is not guaranteed to arrive intact at all
members of the destination group or in the same order relative to other messages.
View the Multicast Mroute Table
To view the Mroute Table:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.