Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
Multicast Routing
486
M6100, M5300, and M7100 Series Managed Switches
Configure Multicast Static Routes
To configure multicast static routes:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing
> Multicast > Static Routes Configuration.
8.
In the Source IP field, enter the IP address that identifies the multicast packet source for the
entry you are creating.
9.
In the Source Mask field, enter the subnet mask to be applied to the source IP address.
10.
In RPF Neighbor field, enter the IP address of the neighbor router on the path to the
source.
11.
In the Metric field, enter the link state cost of the path to the multicast source.
The range is 0 to 255, the default is 1. You can change the metric for a configured route
by selecting the static route and editing this field.
by selecting the static route and editing this field.
12.
Click the Add button.
The static route is added to the switch.
13.
To delete the selected multicast static route, click the Delete button.
14.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.