Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
Multicast Routing
489
M6100, M5300, and M7100 Series Managed Switches
To refresh the screen with the latest information on the switch, click the Update button.
The following table describes the nonconfigurable data that is displayed.
Configure the IPv6 PIM Global Settings
To configure the IPv6 PIM global settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
Table 187. Multicast Mroute Table
Field
Description
Group IP
The destination group IP address.
Source IP
The IP address of the multicast packet source to be combined with the
group IP to fully identify a single route whose Mroute table entry.
group IP to fully identify a single route whose Mroute table entry.
Incoming Interface
The incoming interface on which multicast packets for this
source/group arrive.
source/group arrive.
Outgoing Interfaces
The list of outgoing interfaces on which multicast packets for this
source/group are forwarded.
source/group are forwarded.
Up Time (hh:mm:ss)
The time in seconds since the entry was created.
Expiry Time (hh:mm:ss)
The time in seconds before this entry ages out and is removed from the
table.
table.
RPF Neighbor
The IP address of the reverse path forwarding (RPF) neighbor.
Protocol
The multicast routing protocol which created this entry. The possible
values are as follows:
values are as follows:
•
PIM-DM
•
PIM-SM
Flags
The value displayed in this field is valid if the multicast routing protocol
running is PIM-SM. The possible values are RPT or SPT. For other
protocols a – (hyphen) is displayed.
running is PIM-SM. The possible values are RPT or SPT. For other
protocols a – (hyphen) is displayed.