Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
Configure System Information
72
M6100, M5300, and M7100 Series Managed Switches
7.
Select System > Management > DNS > Host Configuration.
8.
In the Host Name (1 to 255 characters) field, specify the static host name to add.
Its length cannot exceed 255 characters and it is a mandatory field.
9.
In the IP Address field, enter the IP address in standard IPv4 dot notation to associate with
the host name.
10.
Click the Add button.
The entry appears in the list on the screen.
11.
To remove an entry from the static DNS table, select its check box and click the Delete
button.
To clear all the dynamic host name entries from the list, click the Clear button.
To refresh the screen, click the Update button.
The Dynamic Host Mapping table shows host name-to-IP address entries that the switch
learned. The following table describes the dynamic host fields.
learned. The following table describes the dynamic host fields.
Configure the Switch Database Management Template
Preference
Preference
A Switch Database Management (SDM) template is a description of the maximum resources
a switch or router can use for various features. Different SDM templates allow different
Table 25. DNS Dynamic Host Mapping
Field
Description
Host
Lists the host name that you assign to the specified IP address.
Total
Amount of time since the dynamic entry was first added to the table.
Elapsed
Amount of time since the dynamic entry was last updated.
Type
The type of the dynamic entry.
Addresses
Lists the IP address associated with the host name.