Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

The IGMP Proxy is used by IGMP Router (IPv4 system) to enable the system to issue IGMP 
host messages on behalf of hosts that the system discovered through standard IGMP router 
interfaces. With IGMP Proxy enabled, the system acts as proxy to all the hosts residing on its 
router interfaces.

This command enables the IGMP Proxy on the an interface or range of interfaces. To enable 
the IGMP Proxy on an interface, you must enable multicast forwarding. Also, make sure that 
there are no multicast routing protocols enabled on the router.

This command disables the IGMP Proxy on the router. 

This command sets the unsolicited report interval for the IGMP Proxy interface or range of 
interfaces. This command is valid only when you enable IGMP Proxy on the interface or 
range of interfaces. The value for the seconds argument is a number in the range 1–260 
seconds.

Number of Joins

The number of times a group membership has been added on this interface.

Number of Groups

The current number of membership entries for this interface.

Format

ip igmp-proxy

Mode

Interface Config

Format

no ip igmp-proxy

Mode

Interface Config

Default

1

Format

ip igmp-proxy unsolicit-rprt-interval seconds

Mode

Interface Config