Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

(NETGEAR) #show ipv6 pim statistics vlan 10

=====================================================================

Interface  Stat   Hello Register Reg-Stop Join/Pru  BSR  Assert  CRP 

=====================================================================

Vl10        Rx       0        0        0        0     0     0     0 

            Tx       2        0        0        0     0     0     0 

     Invalid Packets Received - 0

---------------------------------------------------------------------

(NETGEAR) #show ipv6 pim statistics 1/0/5

=====================================================================

Interface  Stat   Hello Register Reg-Stop Join/Pru  BSR  Assert  CRP 

=====================================================================

1/0/5       Rx       0        0        6        5     0     0     0 

            Tx       10       9        0        0     0     0     0 

     Invalid Packets Received - 0

IGMP and MLD snooping are Layer 2 functionalities but IGMP and MLD are Layer 3 multicast 
protocols. If you want to use IGMP and MLD snooping, a network must include a multicast 
router that can function as a querier to solicit multicast group registrations. However, if 
multicast traffic is destined to hosts within the same network, a multicast router is not 
required but an IGMP and MLD snooping querier must be running on one of the switches in 
the network and snooping must be enabled on all switches in the network. For more 
information, see 

Use this command, in the administrative mode of the router, to enable MLD in the router.

Default

Disabled

Format

ipv6 mld router

Mode

Global Config