Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

ACL

Total number of ACL rules (x) exceeds max (y) 
on intf  i.

The combination of all ACLs applied to an 
interface has resulted in requiring more rules 
than the platform supports.

ACL

ACL name, rule x: This rule is not being logged

The ACL configuration has resulted in a 
requirement for more logging rules than the 
platform supports. The specified rule is 
functioning normally except for the logging 
action.

ACL

aclLogTask: error logging ACL rule trap for 
correlator number

The system was unable to send an SNMP trap 
for this ACL rule which contains a logging 
attribute.

ACL

IP ACL number: Forced truncation of one or 
more rules during config migration

While processing the saved configuration, the 
system encountered an ACL with more rules than 
is supported by the current version. This may 
happen when code is updated to a version 
supporting fewer rules per ACL than the previous 
version.

COS

cosCnfgrInitPhase3Process: Unable to apply 
saved config -- using factory defaults

The COS component was unable to apply the 
saved configuration and has initialized to the 
factory default settings.

DiffServ

diffserv.c 165: diffServRestore Failed to reset 
DiffServ. Recommend resetting device

While attempting to clear the running 
configuration an error was encountered in 
removing the current settings. This may lead to 
an inconsistent state in the system and resetting 
is advised.

DiffServ

Policy invalid for service intf: policy name, 
interface x, direction y

The DiffServ policy definition is not compatible 
with the capabilities of the interface specified. 
Check the platform release notes for information 
on configuration limitations.