Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Switch Software Log Messages
1095
M4200 and M4300 Series ProSAFE Managed Switches
Multicast
Table 61. VRRP Log Messages
Component
Message
Cause
VRRP
VRRP packet of size xxx dropped. Min VRRP
packet size is xxx;
packet size is xxx;
Max VRRP packet size is xxx.
This message appears when there is flood of
VRRP messages in the network.
VRRP messages in the network.
VRRP
VR xxx on interface xxx started as xxx.
This message appears when the Virtual router is
started in the role of a Master or a Backup.
started in the role of a Master or a Backup.
VRRP
This router is the IP address owner for virtual
router xxx on interface xxx. Setting the virtual
router priority to xxx.
router xxx on interface xxx. Setting the virtual
router priority to xxx.
This message appears when the address
ownership status for a specific VR is updated. If
this router is the address owner for the VR, set
the VR's priority to MAX priority (as per RFC
3768). If the router is no longer the address
owner, revert the priority.
ownership status for a specific VR is updated. If
this router is the address owner for the VR, set
the VR's priority to MAX priority (as per RFC
3768). If the router is no longer the address
owner, revert the priority.
Table 62. ARP Log Message
Component
Message
Cause
ARP
IP address conflict on interface xxx for IP
address yyy. Conflicting host MAC address is
zzz.
address yyy. Conflicting host MAC address is
zzz.
When an address conflict is detected for any IP
address on the switch upon reception of ARP
packet from another host or router.
address on the switch upon reception of ARP
packet from another host or router.
Table 63. RIP Log Message
Component
Message
Cause
RIP
RIP: discard response from xxx via unexpected
interface
interface
When RIP response is received with a source
address not matching the incoming interface’s
subnet.
address not matching the incoming interface’s
subnet.
Table 64. IGMP/MLD Log Messages
Component
Message
Cause
IGMP/MLD
MGMD Protocol Heap Memory Init Failed; Family
– xxx.
– xxx.
MGMD Heap memory initialization Failed for the
specified address family. This message appears
when trying to enable MGMD Protocol.
specified address family. This message appears
when trying to enable MGMD Protocol.
IGMP/MLD
MGMD Protocol Heap Memory De-Init Failed;
Family – xxx.
Family – xxx.
MGMD Heap memory de-initialization Failed for
the specified address family. This message
appears when trying to disable MGMD
(IGMP/MLD) Protocol. As a result of this, the
subsequent attempts to enable/disable MGMD
will also fail.
the specified address family. This message
appears when trying to disable MGMD
(IGMP/MLD) Protocol. As a result of this, the
subsequent attempts to enable/disable MGMD
will also fail.