Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

A command is one or more words that might be followed by one or more parameters. 

Parameters can be required or optional values.

Some commands, such as show network and clear vlan, do not require parameters. 
Other commands, such as network parms, require that you supply a value after the 
command. You must type the parameter values in a specific order, and optional parameters 
follow required parameters. The following example describes the network parms 
command syntax: 

 is the command name. 

 and netmask are parameters and represent required values that you must enter 

after you type the command keywords.

[gateway]

 is an optional keyword, so you are not required to enter a value in place of 

the keyword.

This command line reference manual lists each command by the command name and 
provides a brief description of the command. Each command reference also contains the 
following information:

Format shows the command keywords and the required and optional parameters.

Mode identifies the command mode you must be in to access the command.

Default shows the default value, if any, of a configurable setting on the device.

The show commands also contain a description of the information that the command shows.

The parameters for a command might include mandatory values, optional values, or keyword 
choices. Parameters are order-dependent. The following table describes the conventions this 
document uses to distinguish between value types.

Format 

network parms ipaddr netmask [gateway]

value or [value]

Indicates a variable value. You must replace the 
italicized text, which can be placed within curly 
brackets or square brackets, with an appropriate 
value, which might be a name or number.

[ ] square brackets

[keyword]

Indicates an optional parameter.

{ } curly braces

{choice1 | choice2}

Indicates that you must select a parameter from the 
list of choices.