Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Utility Commands
187
M4200 and M4300 Series ProSAFE Managed Switches
show bootvar
This command displays the version information and the activation status for the current
images on the supplied unit of the stack. If you do not specify a unit number, the command
displays image details for all nodes in the stack. The command also displays any text
description associated with an image. This command, when used on a standalone system,
displays the switch activation status. For a standalone system, the unit parameter is not valid.
images on the supplied unit of the stack. If you do not specify a unit number, the command
displays image details for all nodes in the stack. The command also displays any text
description associated with an image. This command, when used on a standalone system,
displays the switch activation status. For a standalone system, the unit parameter is not valid.
filedescr
This command associates a given text description with an image and replaces any existing
description. The command is executed on all units in a stack.
description. The command is executed on all units in a stack.
update bootcode
This command updates the bootcode (boot loader) on the switch. The bootcode is read from
the active image for subsequent reboots. The unit parameter identifies the member on
which this command must be executed. When this parameter is not supplied, the command
is executed on all units in a stack.
the active image for subsequent reboots. The unit parameter identifies the member on
which this command must be executed. When this parameter is not supplied, the command
is executed on all units in a stack.
System Information and Statistics Commands
This section describes the commands you use to view information about system features,
components, and configurations.
components, and configurations.
show arp switch (system information and statistics commands)
This command displays the contents of the Address Resolution Protocol (ARP) table that is
associated with the IP address of the switch. This IP address learns only ARP entries that are
associated with the management interfaces (network or service ports). ARP entries that are
associated with routing interfaces are not listed.
associated with the IP address of the switch. This IP address learns only ARP entries that are
associated with the management interfaces (network or service ports). ARP entries that are
associated with routing interfaces are not listed.
Format
show bootvar [unit]
Mode
Privileged EXEC
Format
filedescr {image1 | image2} text-description
Mode
Privileged EXEC
Format
update bootcode [unit]
Mode
Privileged EXEC
Format
show arp switch
Mode
Privileged EXEC