Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

This command clears buffered logging (system startup and system operation logs).

This command clears all event messages that are stored on the switch.

This command enables email alerting and sets the lowest severity level for which log 
messages are emailed. If you specify a severity level, log messages at or above this severity 
level, but below the urgent severity level, are emailed in a non-urgent manner by collecting 
them together until the log time expires. You can specify the severitylevel value as 
either an integer from 0 to 7 or symbolically through one of the following keywords: 
emergency

 (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), 

or debug (7).

This command disables email alerting.

This command sets the lowest severity level at which log messages are emailed immediately 
in a single email message. Specify the severitylevel value as either an integer from 0 to 
7 or symbolically through one of the following keywords: emergency (0), alert (1), 
critical

 (2), error (3), warning (4), notice (5), info (6), or debug (7). Specify none 

to indicate that log messages are collected and sent in a batch email at a specified interval.

Format

clear logging buffered

Mode

Privileged EXEC

Format

clear eventlog

Mode

Privileged EXEC

Default

disabled; when enabled, log messages at or above severity Warning (4) are emailed

Format

logging email [severitylevel]

Mode

Global Config

Format

no logging email

Mode

Global Config