Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Utility Commands
245
M4200 and M4300 Series ProSAFE Managed Switches
no file verify
Resets the configured digital signature verification value to the factory default value.
write memory
Use this command to save running configuration changes to NVRAM so that the changes
you make will persist across a reboot. This command is the same as copy
system:running-config nvram:startup-config
you make will persist across a reboot. This command is the same as copy
system:running-config nvram:startup-config
. Use the confirm
keyword to
directly save the configuration to NVRAM without prompting for a confirmation.
Simple Network Time Protocol Commands
This section describes the commands you use to automatically configure the system time
and date by using Simple Network Time Protocol (SNTP).
and date by using Simple Network Time Protocol (SNTP).
sntp broadcast client poll-interval
This command sets the poll interval for SNTP broadcast clients in seconds as a power of two
where poll-interval
where poll-interval
can be a value from 6 to 10.
no sntp broadcast client poll-interval
This command resets the poll interval for SNTP broadcast client back to the default value.
Format
no file verify
Mode
Global Config
Format
write memory [confirm]
Mode
Privileged EXEC
Default
6
Format
sntp broadcast client poll-interval poll-interval
Mode
Global Config
Format
no sntp broadcast client poll-interval
Mode
Global Config