Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Software Modules
25
M4200 and M4300 Series ProSAFE Managed Switches
Access the CLI
You can access the CLI by using a direct console connection or by using a telnet or SSH
connection from a remote management host.
connection from a remote management host.
For the initial connection, you must use a direct connection to the console port. You cannot
access the system remotely until the system has an IP address, subnet mask, and default
gateway. You can set the network configuration information manually, or you can configure
the system to accept these settings from a BootP or DHCP server on your network. For more
information, see
access the system remotely until the system has an IP address, subnet mask, and default
gateway. You can set the network configuration information manually, or you can configure
the system to accept these settings from a BootP or DHCP server on your network. For more
information, see