Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

Use the Time Zone commands to configure system time and date, Time Zone and Summer 
Time (that is, Daylight Saving Time). Summer time can be recurring or non-recurring.

This command sets the system time and date.

(NETGEAR Switch) (Config)# clock set 03:17:00

(NETGEAR Switch) (Config)# clock set 11/01/2011

Use the clock summer-time date command to set the summer-time offset to Coordinated 
Universal Time (UTC). If the optional parameters are not specified, they are read as either 0 
or \0, as appropriate.

Format

clock set hh:mm:ss

clock set mm/dd/yyyy

Mode

Global Config

hh:mm:ss

Enter the current system time in 24-hour format in hours, minutes, and seconds. The range is hours: 
0 to 23, minutes: 0 to 59, seconds: 0 to 59.

mm/dd/yyyy

Enter the current system date the format month, day, year. The range for month is 1 to 12. The range 
for the day of the month is 1 to 31. The range for year is 2010 to 2079. 

Format

clock summer-time date {date month year hh:mm date month year hh:mm}[offset 

offset] [zone acronym]

Mode

Global Config

date

Day of the month. Range is 1 to 31.

month

Month. Range is the first three letters by name; jan, for example.

year

Year. The range is 2000 to 2097.

hh:mm

Time in 24-hour format in hours and minutes. The range is hours: 0 to 23, minutes: 0 to 59.